AEG IMS 4442 Instrucciones De Servicio página 38

ENGLISH
38
4. Depending on the iPod/iPhone Model, firstly release
the button lock and start playing music if necessary
with the button (6/6).
5. Follow your iPod/iPhone manual for further use of the
controls.
CAUTION:
Return to radio mode before disconnecting your iPod/
iPhone from this device to avoid damages to your iPod/
iPhone.
NOTE:
If you have an incoming call when playing back music
with the iPhone docked, then playback stops and you
can hear the ring tone.
Description of iPod/iPhone Controls
(6/6)
You can pause and continue music playback. Press again
to continue playback.
(5 on FB)
Press 1 x = Restart of the song from the beginning.
Press 2 x = Skip to the previous song.
Press 3 x = Skip to the song before the previous song,
etc. Press and hold during playback to
search in reverse through the song.
(5 on FB)
Press to skip to the next song and the following songs.
Press and hold during playback to search forward through
the song.
REPEAT (16 on RC)
Activates the Repeat function.
MENU (17 on RC)
Press this button to bring up the iPod/iPhone Menu or to
return to the previous menu.
ENTER (14 on RC)
Press this button to activate a function or to display the
next menu.
/ (7/11 on FB)
Press these buttons, to scroll up/down the iPod/iPhone
Menu.
iPod/iPhone Charging
Your iPod/iPhone battery is charged as soon as the iPod/
iPhone is docked. To do this, the unit must be connected
to the mains.
NOTE:
• Use the adapter supplied with your iPod to ensure
that your iPod fits correctly.
• Not all iPod/iPhone generations support the charge
mode.
• The duration of the charging process depends on the
iPod/iPhone which is used and its operating condition.
Connect External Devices
This device is equipped with two connectors for analogue
playback devices. AUDIO IN (7) on the front and AUX
on the back of the device. To listen to the music via the
speakers, connect playback devices such as MP3 player,
CD player, etc..
1. Connect the external device as follows:
• Via 3.5mm stereo jack to AUDIO IN (7). • Via RCA cable (2x RCA) to AUX on the back of the
device.
NOTE:
If external devices are connected to both inputs,
playback via AUDIO IN (7) is preferred.
2. Now select AUX out mode with the MODE button (4).
NOTE:
Alternatively select AUX mode by pressing the AUX
button (3 on RC).
3. You will find further instructions in the manual of
your external sound source.
4. Listen to music playback from external playback
devices via the speakers. Press the VOL+/VOL- buttons
(5/9/13) to set the volume level.
NOTE:
Set the volume of the external device to a reasonable
level.
Cleaning
• Before cleaning disconnect from mains power supply.
• Clean the device with a soft damp cloth without
detergents.
• Do not submerge the device in water.
• Remove the speaker grill and clean, for instance with
a vacuum cleaner or a lint brush. Replace the grill
onto the mountings after cleaning.