Air Flow Direction Adjustment - Haier HSU-09C12 Manual De Operación

Operation

(5) Air flow direction adjustment

After operation mode is selected, horizontal flap will open automatically according to the mode.
Referring to the Fig.
COOL
About 10
Up and down (Use remote controller)
Press SWING button, horizontal flap will move
within the range shown in the Fig. Press SWING
button stop it at a fixed position.
About 10
COOL
About 45
Cautions:
It is advisable not to keep horizontal flap at
downward position for a long time in COOL
or DRY mode, otherwise, condensate
water might occur.
(6) Unit stop
Press ON/OFF button.
Only time remains on LCD.
Horizontal flap closes automatically.
Hints
As cold air flows downward in COOL mode, adjusting air flow horizontally will be much more
helpful for a better air circulation.
Be careful not to catch a cold when cold air blows downward.
It is harmful to your health in summer to go frequently in and out of places where temp.
difference is above 7
More than this, unit's load can be reduced and power consumption cut down as well. So, you'd
better set a temp. difference of 3-5
All manuals and user guides at all-guides.com
o
o
o
o
C. Temp. difference of 3-5
o
C between indoor and outdoor temp. in COOL mode.
Left and right air flow adjustment
(manual)
Move the vertical blade by a knob on air
conditioner to adjust left and right direction
referring to Fig.
Cautions:
When humidity is high, condensate water
might occur at air outlet if all vertical
louvers are adjusted to left or right.
Cautions:
Unit won't restart until 3 minutes have
elapsed, due to system protection.
HEAT mode is not available on
cooling only unit.
o
C will remove your fatigue.
9