Warranty Registration - Tripp-Lite B013-330 Guia De Inicio Rapido

página de 6

/ 6

Idiomas disponibles

Out-of-the-Box Installation

Plan the Layout Path and Deploy the CAT5 cable

Step 1: Lay out the CAT5 cable according to your planned path.

Conﬁ guring the Transmitter Unit

Step 2: Connect one end of the CAT5 cable to the RJ45 port of the Transmitter Unit.

Step 3: Connect the Transmitter Unit to the PC/KVM using the Slim 3-in-1 PS/2 KVM cable and/or a USB cable. (Note that if you are using a USB interface, you

should connect to the PC/KVM's VGA port using the HDB15 connector of the Slim 3-in-1 PS/2 KVM Cable. Instead of using the PS/2 connectors of the KVM

Cable, connect a USB cable from the Transmitter Unit's USB port to the PC/KVMs USB port). The Transmitter Unit is powered through the connector interface

with the computer.

Step 4: Set up Local Console: Connect a keyboard, mouse and monitor to the Transmitter Unit's Console connectors.

Step 5: Power on the computer(s), and check the keyboard, mouse and video output on the Local Console to see if they are working properly. Everything should

be working properly before you proceed to the following steps.

Conﬁ guring the Receiver Unit

Step 7: Connect the other end of the CAT5 cable to the RJ45 port of the Receiver Unit.

Step 8: Connect the power adapter to the Receiver Unit to power it up before connecting the keyboard, mouse and monitor.

Step 9 Set up the Remote Console: Connect a keyboard, mouse and monitor to the Receiver Unit's Console ports.

Step 10: Check the keyboard, mouse and video output on the Remote Console to see if everything works ﬁ ne. At this point, the video may be blurry, requiring

you to adjust the Gain and/or Equalization.

Step 11: Adjust the video Gain and/or Equalization level by turning the two mechanical knobs on the front-panel of the Receiver Unit.

Conﬁ guration Hotkeys

The B013-330 CAT5 KVM Extender Set provides conﬁ guration hotkeys that are available on the local console only, since the remote console might be located in

a non-secured area where access may need to be restricted. With these hotkeys users can block or grant access from the remote console; or, they can put the

remote console into view-only mode. If the user needs to use a different hotkey preceding sequence, it can be switched to one of 5 different hotkeys.

Local Console hotkeys —Hotkey Preceding Sequence

Change the hotkey preceding sequence to one of 5 choices using the sequence below:

Scroll + Scroll + H + (x)

x = Scroll, CAPS, F12, NUM, Esc

Toggle Remote Console ON/OFF

Turn Remote Console access On/Off using the following sequence:

Scroll + Scroll + S

Power LED ﬂ ashes in fast mode

Toggle Remote Console View Only ON/OFF

Turn the Remote Console View Only Mode On/Off using the following sequence:

Scroll + Scroll + K

Power LED ﬂ ashes in slow mode

Warranty Registration

Visit www.tripplite.com/warranty today to register the warranty for your new Tripp Lite product. You'll be automatically entered into a drawing for a chance to win

a FREE Tripp Lite product!*

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

Tripp Lite follows a policy of continuous improvement. Product speciﬁ cations are subject to change without notice.

Made in China

All manuals and user guides at all-guides.com

1111 W. 35th Street, Chicago, IL 60609 USA

(773) 869-1234 • www.tripplite.com

continuous improvement. Speciﬁ cations are subject to change without notice.

USB Cable

(Included)

Slim 3-in-1

PS/2 KVM Cable