Cap 4 Using The Machine; Control Panel; Switching The Dishwasher On; Cycle Selection And Start-Up - Eurofred 7FEB0015 Manual De Instrucciones

UK
1. ON/OFF
2. PROGRAMME SELECTION (optional)
3. DRAIN
4. START
5. POWER
6. CYCLE UNDERWAY
7. HEATING UNDERWAY
The arrangement of buttons and leds may vary according to the
machine type
4.2

Switching the dishwasher on

 Turn on the main power switch and open the
external water tap, the POWER light (5) will flash.
 Check the presence of the overflow.
 Press ON/OFF (1).
 The POWER (5) and HEATING (7) LEDs will come
on, the water will be filled automatically and
thereafter the heating phase will start.
 If only the POWER LED (5) is on this means that
the optimal washing conditions have been reached.
4.3

Filling the rack

 Use a suitable rack, fill without overloading and
without overlapping the dishes.
 Always wipe the dishes before placing in the
dishwasher; do not put dishes with dry or solid
residues in the washer.
 Place the empty dishes in the rack facing
downwards.
 Place plates and the like in the sloping rack, with
the inner surface facing upwards.
 Place the cutlery in the cutlery basket, handle end
down.
 Do not place silver and stainless steel cutlery in the
same cutlery basket as this will turn the silver brown
and may corrode the steel.
 Wash the dishes immediately after use, in order to
prevent any residue from hardening and sticking on
them.
 Use only solid, dishwasher-proof dishes.
Page 6 of 10
DISHWASHER INSTRUCTION MANUAL
Cap 4 USING THE MACHINE
1 2
4.4

Cycle selection and start-up

Under-counter dishwashers
 Select the washing cycle suited to the type of
dishes using PROGRAMME SELECTION (2);
where foreseen, the button pressed
corresponds to the shorter cycle.
 To start the programme press the START (4)
button, the CYCLE UNDERWAY (6) LED starts
to flash.
 When the cycle is completed the CYCLE
UNDERWAY (6) led goes off
 For rapid drying, remove the rack from the
machine as soon as the cycle finishes.
 To stop a wash cycle early, press down and
hold the START (4) button for a few seconds.
Hood dishwashers
 Select the washing cycle suited to the type of
dishes using PROGRAMME SELECTION (2);
where foreseen, the button pressed
corresponds to the shorter cycle.
 Press START (4) for automatic start.
 Lower the hood, the cycle starts automatically
and the CYCLE UNDERWAY (6) led starts to
flash.
 When the cycle is completed the CYCLE
UNDERWAY (6) led goes off.
 Subsequent cycles will start automatically on
closing the hood.
 For rapid drying, remove the rack from the
machine as soon as the cycle finishes.
 To stop a wash cycle early, press the START
button (4).

4.1 CONTROL PANEL

3 4
5
6
7