Setting The Timer; Setting The 1 Hour Timer; Setting The Holiday Timer - Eurofred aquatermic AQSFT 12 Instrucciones De Uso

SETTING THE TIMER

A) HOW TO SET THE ON TIME
1. Press the ST button once.
The ON and time indications flash.
2. Press the H button until the designed
hour is displayed.
Press the M button until the designed
minutes are displayed. The display
EG will change automatically back to
show the present time after 10 sec.
3. Press the ON/OFF button to start the
air conditioner.
4. Press the button to activate the
ON timer.
B) HOW TO SET THE OFF TIME
1. Press the ST button twice.
The OFF and time indications flash.
2. Press the H button until the designed
hour is displayed.
Press the M button until the designed
minutes are displayed. The display will
change automatically back to show
the present time after 10 sec.
3. Press the ON/OFF button to start the
air conditioner.
4. Press the button two times to
activate the OFF timer.
C) HOW TO SET A PROGRAM FOR
DAILY ON/OFF OPERATION (OR
VICEVERSA)
1. Set the timer ON/OFF as shown in A)
and B).
2. Press the ON/OFF button to start the
air conditioner.
3. Press three times the
activate the DAILY timer.
NOTE
After timer setting, press ST button in order to check the
ON/OFF setting time.
AQFST-12-18-USO.indd 8 AQFST-12-18-USO.indd 8
This function causes the unit to operate for one hour at the
set conditions, regardless of whether the unit is on or off.
TIMER SETTING PROCEDURE.
●
CANCELLATION PROCEDURE
●
C
●
●
3
The Holiday Timer function allows you to activate the
2 2
indoor unit (either it is the only one of a monosplit system
or one unit of a multisplit system), with a dalay up to
1 4
99 days you can set for the Daily Timer, On Timer, Off
Timer functions (not available for 1 HOUR TIMER) already
explained in this manual.
With this function you can set the air conditioner to be
switched on again after a long week end, a holiday of one
week or more, ecc...
To activate this function you have to follow the following
steps in order :
1. Keep pressed the button "TIMER SELECTION" of the
2. Select the desired timer (Daily Timer, On Timer,
3. Set the desired number of days of delay using the
button to
4. Keep pressed again the button "TIMER SELECTION"
At this point, the symbol of the desired timer will flash
and the selected timer will be activated only after the set
number of delay days.
8

SETTING THE 1 HOUR TIMER

Press four times the button.The 1
HOUR TIMER mark will appear on the
display.
Press the ON/OFF button to turn the air conditioner off.
Wait for the indoor unit to stop operating.
Press the ON/OFF button again to turn the air conditioner
on.

SETTING THE HOLIDAY TIMER

remote control unit (clock figure) for more than 6~7
seconds. In this way you enter the menu to select the
number of days of delay.
Off Timer) pressing on the same button "TIMER
SELECTION".
button "+" .
for more than 6~7 seconds. You enter again the normal
menu of the remote control unit.
C
3
1 - 2 - 4
28/07/2017 12:28:14 28/07/2017 12:28:14