Remote Control Unit - Eurofred aquatermic AQSFT 12 Instrucciones De Uso

REMOTE CONTROL UNIT

DISPLAY
Information is displayed when the remote controller is switched
on. If switched off, only the operating mode, the room temperature
and the clock are shown
Operation mode
Automatic
Cooling
Heating
Dehumidification
Fan
Night Oscillation
mode Flap
MODE SELECTOR BUTTON
Press this button to modify the air
conditioner mode.
(cooling)
The air conditioner makes the room
cooler.
(dry)
The air conditioner reduces the humidity
in the room.
(automatic)
When this setting is selected (+ IFEEL
ON), the unit calculates the difference
between the thermostat setting and
the perceived room temperature and
automatically switches to the "cool" or
"heat" mode.
(fan)
The air conditioner works only as a
circulation fan.
TEMPERATURE SETTING BUTTONS
- (cooler)
Press this button to decrease the set
temperature.
+ (warmer)
Press this button to increase the set
temperature.
"FAN " BUTTON (fan speed)
Fan speed is automatically
s e l e c t e d b y
microcomputer.
High speed.
Medium speed.
Low speed.
NIGHT/ECO BUTTON
Press this button in order to select the
NIGHT/ECO mode.
"HIGH POWER" BUTTON
Press this button in order to select the
HIGH POWER mode.
CLOK AND TIMER SETTING BUTTON
Press this button in order to:
• set the clock
• set the ON/OFF timer
For details refer to paragraphs "SETTING
THE HOUR" and "SETTING THE TIMER".
AQFST-12-18-USO.indd 5 AQFST-12-18-USO.indd 5
I FEEL mode is active
(remote controller
sensor active)
Filter Ti0
C
Displayed when
transmitting data
Inverter model
Timer modes
Clock
Fan speed
HIGH POWER
mode Automatic
High speed
SENSOR
A t e m p e r a t u r e
sensor inside the
remote control unit
detects the room
temperature.
C
t h e
HOURS AND MINUTES SETTING
BUTTONS
With these buttons is possible to set the
clock and the timer. For details refer to
paragraphs " SETTING THE HOUR" and
"SETTING THE TIMER".
5 5
is ON
Room
2
temperature
Set point
temperature
Medium speed
Low speed
MODE SELECTOR BUTTON
TRANSMITTER
When you press
Press this button to modify the air
the buttons of the
conditioner mode.
remote control unit,
(heating)
the mark
The air conditioner makes the room
a p p e a r s o n t h e
warmer.
display to transmit
the setting changes
Fixed symbol: the fan stops when the set
to the receiver in the
temperature is exceeded.
air conditioner.
B l i n k i n g
RECIRCULATION FUNCTION): the
fan keeps running even after the set
temperature is exceeded.
(automatic)
When this setting is selected (+ IFEEL ON),
the unit calculates the difference between
the thermostat setting and the perceived
room temperature and automatically
switches to the "cool" or "heat" mode.
ON/OFF BUTTON
This button turns the air conditioner ON
and OFF.
FLAP BUTTON
Press this button in order to select the
desired function.
Fixed: six position
Continous oscillations
Automatically oscillations
IFEEL/IFEEL C SENSOR SELECTOR
Press this button to modify the active
setting for room temperature detection
(from remote controller to air conditioner
and viceversa).
MENU BUTTON
Use this button in order to enter the
functions menu.
TIMER SELECTION BUTTON
Press this button to select the type of
timer to activate. For details refer to
paragraph "SETTING THE TIMER".
EG
s y m b o l ( H E A T I N G
28/07/2017 12:28:12 28/07/2017 12:28:12