Denon DVD-5910 Instrucciones De Operación página 13

ENGLISH
(3) Connecting to a AV amplifier with a built-in decoder
When DVDs recorded in Dolby Digital or DTS are played, Dolby Digital or DTS bitstream signals are output from the DVD player's digital
audio output connectors. If a Dolby Digital or DTS decoder is connected, you can achieve sound with the power and sense of presence
of a movie theater or concert hall.
DVD-5910
NOTE:
• Harsh noise that could harm your ears or damage the speakers is generated when a DVD recorded in DTS is played while using
a decoder, etc., that is not DTS-compatible.
2 Connecting an optical fiber cable (commercially available) to the digital audio input connector (OPTICAL)
Dust cap
Remove the dust cap, line up the cable in the proper directly, then
insert it securely as far as it goes.
Optical fiber cable
(or)
(commercially available)
Digital audio input connector
(OPTICAL)
AV amplifier with a built-in decoder
(AV control center)
Line up in proper direction
75Ω/ohms pin-plug cable
(commercially available)
Digital audio input connector
(COAXIAL)
CH SEL
ENTER
NOTE:
• Store the dust cap in a safe place, and be careful not to
lose it.
When not using the terminal, attach the cap to protect
the terminal from dust.
ENGLISH
To power outlet
13