Don The Prosthetic Glove On The Prosthetic Hand - Ottobock 8S511-AxonSkinSilicone Instrucciones De Uso

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 32

5.2 Don the prosthetic glove on the prosthetic hand

INFORMATION
Work quickly, adhering to the sequence of the instructions provided.
► When using the mounting plate:
INFORMATION: Install the mounting plate on a suitable
surface and at optimal working height.
Attach the alignment rod to the mounting plate.
► When using a vice:
Clamp the alignment rod into a vice at optimal working height.
► Set the prosthetic hand to hand position "Neutral position"
(Neutral Mode) and lock the wrist.
► Install the prosthetic hand on the mounting tool.
► NOTICE! Do not overstretch the textile glove during the
donning process.
Roll up the textile glove, slide it over the fingers of the prosthet­
ic hand and unroll it over the prosthetic hand.
► Observe the correct positioning:
The cuff of the thumb is positioned in the last thumb groove.
The cuff of the wrist ends at the last groove in the hand shell.
Ottobock | 13
Tabla de contenido
loading

Tabla de contenido