DISABLE / DISARM THE ALARM WITHOUT THE CONTROL
9
This secret button needs to be installed in a concealed but easily accessible place. From
this button, you can deactivate the control panel without the control by turning the
ignition on and touching the MASTER BUTTON.
PROGRESSIVE LOCK CYCLE
10
LOCK
FOR 2 SECS.
COMPLETELY
LOCKED
AUTOMATIC LOCK
11
Confirm this function is working. If the motorcycle does not detect anything on any of
the sensors in 1 minute, the alarm will activate automatically and the siren will give one
beep (see table section 12, function 8).
PROGRAMMING
12
ALARM
DISABLED
1 BEEP ACTIVATED
2 BEEPS DEACTIVATED
Nº of Beeps
1
2
3
4
5
6
7
8
9
10
After the 10th beep, if it is not released the button will not change the current setting.
UNLOCK
FOR 10 SECS.
UNLOCK
FOR 2 SECS.
TURN ON
IGNITION
MASTER BUTTON
Programming controls
Enable/Disable alarm permanently
Enable/Disable with blinkers
Enable/Disable with siren
Time until lock down: 1:30 min or 3 min
Anti-theft in NEUTRAL
Anti-Theft in IGNITION
Automatic Lock
Accelerometer
Factory Configuarations
LOCK
FOR 2 SECS.
PRESS THE
RELEASE THE MASTER BUTTON
AT THE DESIRED FUNCTION
Function
12
UNLOCK
FOR 5 SECS.
LOCK
FOR 2 SECS.
LISTEN CONSECUTIVE
BEEPS OF THE FUNCTIONS
Defaut Config.
Enable
Enable
Enable
3 minutes
Disable
Disable
Enable
Enable