StetSom MOTO DUPLO i Manual De Usuario página 11

INTEGRATED ANTI-THEFT SYSTEM
5
5.1. ANTI-THEFT FUNCTION IN NEUTRAL
If the motorcycle is put in neutral while the ignition is on, the anti-theft function is
activated. The MASTER BUTTON needs to be pressed within 3 minutes or the alarm will
give a 10 second warning before entering lock down (see table section 12, function 6).
5.2. ANTI-THEFT FUNCTION USING THE IGNITION
Every time the ignition is turned on the MASTER BUTTON needs to be pressed within
3 minutes or the alarm will give a 10 seconds warning before entering lock down (see
section 11).
ANTI-THEFT BY PRESENCE
6
Activate and then deactivate periodic transmission:
Hold and then press the button
1 time for active periodic transmission or 2 times for deactivated periodic transmission.
To cancel the lock down, press the
In order to deactivate the control unit without the remote control, turn on the
ignition and press the MASTER BUTTON. If the presence function is activated, the
locks mentioned in sections 5.1 (ANTI-THEFT FUNCTION IN NEUTRAL) and 5.2
(ANTI-THEFT FUNCTION IN THE IGNITION) will not be functioning.
TESTING LOCK DOWN BY PRESENCE
7
Turn the ignition on and turn off the periodic transmission of the control
(see section 1). Wait the specified time until lock down.
VALET PARKING FUNCTION
8
If you need to leave your motorcycle at the mechanic, carwash, a place with valet
service, etc..., you can activate this function without showing them where the master
button is or giving them the remote control.
Press the master button 3 times, it will emit 2 beeps and the locks mentioned in
sections 5.1, 5.2 and 6 will be temporarily disabled. Each time the ignition is turned on
or off, 2 beeps will sounds to warn the user that the motorcycle is unprotected. To re-
activate the anti-theft function, press the MASTER BUTTON once. If using the presence
function, you need to press
Press
3 quick taps on the
MASTER BUTTON
1 quick tap on the
MASTER BUTTON
. The control's led light will turn off and then blink
on the presence control.
on the presence control near the motorcycle.
Function
Disables the locks mentioned in
sections 5.1, 5.2 and 6
Enables the locks mentioned in
sections 5.1, 5.2 e 6 (If enabled)
11
Alarm Response
Siren emits 2
beeps
No beeps