Adjusting The Rack Posts (Optional) - Dell PowerEdge 4220 Guia De Instalacion

Figure 1-13. Installing the Side Stabilizer Feet
1 side stabilizer foot (2 per side)
4 Use the provided bolts, washers, and cage nuts to secure each foot to
the rack as shown in Figure 1-13.

Adjusting the Rack Posts (optional)

The position of the rack posts can be adjusted to accommodate systems
of various depths.
1 Open the rack doors.
2 Remove the screws on the bottom, middle, and top of the post
(see Figure 1-14).
3 Move the post to the desired location inside the side of the rack, and
replace the screws in the corresponding holes.
26
Installation Guide
All manuals and user guides at all-guides.com
1