Limiter - Sennheiser EK 3041-U Manual Del Usuario

21 Limiter

Your EK 3041-U receiver is equipped with a switchable limiter which limits
the output voltage of the built-in headphone amplifier. The limiter protects
your hearing and should therefore always be switched on.
Note
The limiter can only be used if the receiver is not inserted in the slot-in
facility of a camcorder but is operated as a stand-alone receiver, e.g.
inserted into a special housing (accessory). If the receiver is inserted in the
slot-in facility of a camcorder, this menu is skipped.
Briefly press the SET button five times.
The display now indicates „—Ltd.—" in alternation with the current
limiter setting, for example:
• „Ltd.OFF", if the limiter
is switched off,
• „Ltd.-10", if the limiter
is set to - 10 dB,
• „Ltd.-20", if the limiter
is set to - 20 dB.
With the /
The new setting becomes effective immediately without having to be stored.
Notes
You can discontinue the programming of this menu at any time. Press the
SET button to change to the next menu or briefly press the ON/OFF
switch to discontinue your entry. The cancellation is briefly confirmed on
the display with „ESC". The display then switches back to the standard
display (display of receiving frequency or channel number)(u see
chapter 16).
After about 15 seconds, the receiver automatically returns to normal
operation if no entry has been made during this period. Here, too, „ESC"
flashes briefly.
44
All manuals and user guides at all-guides.com
buttons you can now select the desired limiter setting.