20 Assigning a channel number
You can assign a channel number (from 001 to 255) to each of the 32 receiving
frequencies. With larger systems, it is recommended to use the same channel
number for both transmitters and receivers in order to provide for simpler
monitoring of the system.
Briefly press the SET button four times.
The display now indicates the assigned channel number in alternation
with „CH SET". (If no channel number has been assigned, three
„hyphens" appear on the display):
With the /
When you get to the desired channel number, press the SET button for
about 1 second. Your entry is confirmed by the fact that „Sto" briefly
appears on the display.
The display then switches back to the preset standard display (display of
receiving frequency or channel number)(u see chapter 16).
Notes
You can discontinue the programming of this menu at any time. Press the
SET button to change to the next menu or briefly press the ON/OFF
switch to discontinue your entry. The cancellation is briefly confirmed on
the display with „ESC". The display then switches back to the standard
display (u see chapter 16).
After about 15 seconds, the receiver automatically returns to normal
operation if no entry has been made during this period. Here, too, „ESC"
flashes briefly.
All manuals and user guides at all-guides.com
buttons you can now select the desired channel number.
43