Size: 170 x 55mm
Color: Blk
D) USING THE CHRONOGRAPH
This chronograph is able to measure and display time in 1/20 second united up to maximum of 59min
59sec. The chronograph 1/20 second hand keeps continuously for 30 seconds after starting, and then
stops at Zero position.
【Measuring time with the stopwatch】
1. Press button " A " to start the chronograph.
2. The chronograph can be started and stopped each time button "A" is pressed.
3. Press button "B" to reset the chronograph and chronograph minute and second hands return to their
Zero positions.
"A"
Reset
Time
"A"
Measurement
"A"
E) CHRONOGRAPH RESET (INCL. AFTER REPLACING BATTERY)
This procedure shoud be performed when the chronograph second hand does not return to the Zero
position.
1. Pull the crown out to the 2nd Click Position.
2. Press the button "A" once to set the chronograph second hand to the Zero position.
3. Press the button "B" once to set the chronograph 1/20 second hand to the Zero position.
* The chronograph hands can be advanced rapidly by continuously pressing button "A" or "B".
4. Once the hands are set at Zero position, reset the time and return the crown to its normal position.
Size: 85 x 55mm
Color: Blk
A) DISPLAYS AND BUTTONS
Chronograph
minute hand
Chronograph
second hand
B) SETTING THE TIME
1. Pull the crown out to the 2nd Click Position.
2. Turn the crown clockwise to set hour and minute hands.
3. After the time has been set, push the crown back to the Normal position.
C) SETTING THE DATE
1. Pull the crown out to the 1st Click Position.
2. Turn the crown clockwise to set the date.
* If the date is set between the hours of around 9:00 PM and 3:00 AM, the date may not change on
the following day.
3. After the date has been set, push the crown back to the Normal position.
A) INDICAZIONI E PULSANTI
Lancetta delle ore
Lancetta dei
minuti del
cronografo
Stop
"B"
Lancetta dei secondi del
cronografo
B) IMPOSTAZIONE DELL'ORA
1. Estrarre la corona alla posizione di secondo scatto.
2. Girare la corona in senso orario per regolare le lancette delle ore e dei minuti.
3. Dopo aver impostato l'ora, riportare la corona alla posizione normale.
C) IMPOSTAZIONE DELLA DATA
1. Estrarre la corona alla posizione di primo scatto.
2. Girare la corona in senso orario per impostare la data.
* Se la data viene impostata tra le 9:00 PM e l'1:00 AM, la data potrebbe non cambiare il giorno seguente.
3. Dopo aver impostato la data, riportare la corona alla posizione normale.
Date
Minute hand
Hour hand
Button A
Normal Position
2 6
2nd Click Position
1st Click Position
Button B
Chronograph
1/20 second hand
Normal second hand
Calendario
Lancetta dei minuti
Pulsante A
Posizione normale
2 6
Posizione 2 ・ scatto
Posizione 1 ・
Pulsante B
Lancetta dei ventesimi di secondo
(1/20) del cronografo
Normal second hand
