Fresh Air Intake (Cmv) Assembly - Airzone Easyzone Manual De Instrucciones

Remember that the motorized elements are numbered in the following
manner:
Connect the duct
corresponding damper. Follow the instructions for
proper insulation. Make a cut in the duct to keep the
motor outside.

Fresh air intake (CMV) assembly

Remove the fixed
undoing the screws. Remove the protective
plate that covers the outside air intake and
reattach the elliptical neck.
from each zone
elliptical neck by
to its
Bend or cut the cover found in the lower
part of the supply dampers to allow the air
to pass through.
EN
5