System Installation; Easyzone Plenum Assembly; Assembly In The Indoor Unit - Airzone Easyzone Manual De Instrucciones

System Installation

EASYZONE PLENUM ASSEMBLY

Assembly in the indoor unit

EN
It is recommended to insulate all metal parts of the Easyzone that remain in contact with the
outside to prevent condensation.
Locate the drilling holes; if they are
covered, use a screwdriver to uncover them
to fix the Easyzone to the unit.
Important: If your unit has a front with
circular adapters, remove this and mount
the supplied adapter.
Be sure to insulate the connection neck.
Use strips of 25 mm thick insulation
material (glass
foam). The width of these insulation strips
is 97 mm for the Standard and Medium
motorized plenum and 37 mm for the Slim
motorized plenum.
4
wool or polyethylene
Place the Easyzone over the unit's supply
vent and fix it using the screws.
Use threaded rods to fix the Easyzone to
the ceiling through the tabs found at each
end.