Rs-485 Connections And Settings - Sanyo DSR-M810P Manual De Instrucciones

6 RS-485/NETWORK SET
3
Press the [ ] and [
"ADVANCED SETTING" and press the
[ ] button.
The <NETWORK SET-ADVANCED> screen appears.
The cursor moves to "ADDRESS SET".
"DVR NAME" displays the name set for the digital video
recorder when using remote control software.
When "ADDRESS SET" has been set to "MANUAL", it will
be possible to set "DVR NAME" using this menu.
4
Press the [ ] button, and then use
the [ ], [ ], and [
"ADDRESS SET".
[Settings] ( indicates initial setting.)
Setting
AUTO When either the VA-SW81LITE or VA-SW814
remote operation software is used, the digital
video recorder's [STILL] button can be pressed
to have the IP address set automatically.
MANUAL The "DVR NAME", "IP ADDRESS" and "SUB NET
MASK" are set on the digital video recorder.
5
When "MANUAL" has been set, set
"DVR NAME", "IP ADDRESS", and
"SUB NET MASK" using the [
[ ], and [ ] buttons.
Refer to "Setting passwords" on P. 36 for more
information regarding setting methods for "DVR NAME".
6
Press the [EXIT/OSD] button.
The display returns to the normal screen.
All manuals and user guides at all-guides.com
] buttons to select
] buttons to set
Description
],
40
When a new IP address is set using the digital video
recorder, it will become valid upon leaving the <RS-485/
NETWORK/REMOTE SET> screen.
When connecting the digital video recorder to a network,
check the IP address with the network administrator.
The set IP address is displayed in the <RS-485/
NETWORK/REMOTE SET> screen.

RS-485 connections and settings

Connect the digital video recorder's RS-485 (A, B) control
terminals in series to the system controller, digital video
recorder or similar device.
[MENU] button [ ] button
[ ] button
1
Press the [MENU] button.
The MENU indicator lights, and the <MAIN MENU> screen
appears.
2
Select "6. RS-485/NETWORK/REMOTE
SET", and press the [
The <RS-485/NETWORK/REMOTE SET> screen
appears.
(1)
(2)
(3)
(4)
(5)
[ ] button
[EXIT/OSD] button
] button.
English