Installing The Wall Mounting Plates - Panasonic UB-T780 Instrucciones De Operación

Installation Manual

Installing the Wall Mounting Plates

1.
Ensure that the wall is strong enough to support the elite Panaboard.
Rated strength: greater than 1324 N (135 kgf)
2.
Using the measuring tape and level, mark the 8 locations to insert the screws.
Note
•
The dotted line in the illustration represents the outer edge of the elite Panaboard.
3.
Drill 8 holes for the wall mounting plates.
•
Drill holes that are appropriate for the screws you are using.
4.
Install the wall mounting plates using the 4 screws.
•
2 screws are used for each wall mounting plate.
The remaining 4 screws are used after installing the elite Panaboard on the wall.
•
Screws (8 count) are not included with the elite Panaboard. Please purchase screws with a size of M6,
appropriate for your type of wall.
34 Operating Instructions (For Basic Operations)
469.5 mm 813 mm
(1 ft. 6 1 / in.) (2 ft. 8
2
725 mm
(2 ft. 4
222.5 mm (8
1 / in.)
8
40 mm (1 5 /
8
982 mm
(3 ft. 2 / in.)
3
4
/ in.)
5
8
30 mm (1 /
1
8
44 mm (1 3 / in.)
4
40 mm (1 / in.)
5
8
982 mm (3 ft. 2
30 mm (1 1 / in.)
8
/ in.)
3
4
in.)
in.)
3 / in.)
4