THERMEx vertical 925 Instrucciones De Uso página 30

Button D = ON and Speed Increase
Starting:
In order to turn on the hood press button ON.
Adjustment:
A brief pressure of the ON button will increase the speed of
the motor a step at a time.
1-
2-
3-
4-
INTENSIVE speed function:
If the ON button is kept pressed for about 2 seconds, the
INTENSIVE speed function is activated for 10 minutes; after
this time, the previously set speed will be restored.
When the function is active LED 4 will fl ash
If you want to interrupt it before the 10 minutes have expired
press the button again.
Button E = Timer
Operation:
The Timer button times the aspiration speed of the hood
when it is activated for 10 MINUTES. After this time has elapsed
the appliance will switch off .
Activation:
In order to activate the function apply a light pressure to the
Timer button.
When the function is active the LED indicator of the set speed
starts fl ashing.
When the lights are on, at the end of the Timer function, these
automatically reduce the light intensity by 30-40%.
In order to deactivate the function, before the predetermined
time, a further pressure of the Timer button, will switch off
the appliance.
Warning! If the intensive speed is operating, the Timer
cannot be activated.
• Special Functions (Button E)
Clean Air function:
This function guarantees the continuous recycling of the air
in the kitchen for a maximum of 12 hours.
By keeping the Timer button pressed for 4 seconds, when
the appliance is switched off , the "CLEAN AIR" function is
activated.
This turns on the motor for 10 minutes every hour at the
fi rst speed; LED 4 fl ashes with an interval of 1 second ON
and 2 seconds OFF.
After this time the motor is switched off and LED 4 remains
fi xed on the display; after another 50 seconds the motor starts
again for another 10 minutes and so on.
- In order to deactivate the "clean air" function press any
All manuals and user guides at all-guides.com
button except for the lights one.
• Alarm indicators
Active carbon/grease fi lter saturation:
When the LEDs on the display turn Red this means that the
fi lters must be replaced or washed.
A – Anti grease fi lters:
When on the display the LED 1 is RED and starts fl ashing, it
means that 30 hours have elapsed and that the anti-grease
fi lters have to be washed.
In order to reset the electronic memory press the OFF button
for 5 seconds until LED 1 stops fl ashing.
B – Active Carbon fi lters:
When on the display the LED 2 is RED and starts fl ashing, it
means that 120 hours have elapsed and that the active carbon
fi lters have to be replaced.
In order to reset the electronic memory press the OFF button
for 5 seconds until LED 2 stops fl ashing.
Activation of the function for the indication of inserted
active carbon fi lters:
By pressing simultaneously the OFF and ON buttons for 5
seconds the active carbon fi lters indicator function is activated
with an acoustic indicator of the Buzzer and the switching on
for 1 second of all GREEN LEDs.
+
Deactivation of the inserted fi lters indicator function:
By pressing simultaneously the OFF and TIMER buttons
for 5 seconds the active carbon fi lters indicator function is
deactivated with an acoustic indicator of the Buzzer and the
switching on for 1 second of all RED LEDs.
+
- In order to check if the electronic memory has been
activated or deactivated on the active carbon fi lters indicators,
press simultaneously the buttons LIGHT and TIMER for 5
seconds.
- if the function is active, the screen will display all the GREEN
LEDs for 3 seconds.
- if the function is not active, the screen will display all the
RED LEDs for 3 seconds.
Warning!
- Check that the Buzzer function has not been deactivated
(see the warning at the beginning of the instructions of this
control).
• Commands: (Fig.20)
NOTE: With this control it is possible to manage the appliance
also with a remote control to be requested as accessory.
Power Button (A) = the on / off button switches on and off
- 30 -
=
=