Energy Saving Mode; Description Display Symbols - Faema TEOREMA A Uso Y Instalación

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 121
The ENERGY SAVING function can also be enabled manually
if you press the key and hold it for several seconds
During this phase:
If the boiler pressure is set at a value exceeding 1.2 bar,
If the boiler pressure is set at a value below 1.2 bar, the
pressure is lowered by 0.4 bar below the set value.
Press any dispensing key to exit the ENERGY SAVING mode
and return to the machine work phase.

Description display symbols

This symbol indicates the boiler water level.
During the loading phase, the dark bottom part of the icon
blinks.
When the optimum level is reached, the symbol looks like
this:
This symbol (dark inside) indicates that the resistance
is activated and functioning.
When the boiler pressure reaches the set value, the icon
looks like this
(light inside).
When the machine is in operation, the two icons
alternate on the display, indicating the presence of the electric
heating.
When the on/off function is programmed, the electric heating
takes place automatically.
This indicates that the heating resistance has been
disabled.
This symbol indicates the boiler pressure value.
If the
"RES" key (
) is pressed for about 3", the pressure
gauge will be displayed analogically. This will be shown on
the display:
26 SEP 12
Press and hold down the
seconds to return to the regular display mode.
.
15:15
"RES" key (
) for about 3
Press the "STOP/Coffee continue"
seconds to force the machine on again.
. Forcing the machine on does not change the pro-
grammed on/off times.
. At this point the machine will remain on until the next
switch off time is reached.
To immediately return the machine to "off" as originally
programmed, switch it off and on again using the general
on-off switch (1).
This symbol indicates that the machine is pre-heating or
the boiler pressure has dropped below 0.5 bar.
This also indicates the boiler heating situation, meaning that it
or if their temperature has fallen below 55°C.
If one of the STOP/continuous coffee" ( ) keys is pressed,
coffee will be served at the temperature reached at that
moment.
All of the other keys are disabled because the working pressure
has not been reached.
While waiting for the machine to be ready for use, insert the
The machine has reached the set work pressure and
temperature when the icon
Press a coffee selection key for each keypad to adjust the
When present, this symbol indicates that the cup warmer
is on.
This symbol indicates the position of the steam selector
lever (1 ÷ 4).
This symbol indicates that the technical programming
menu can be accessed.
7 EN
key for a few
disappears from the display.
Tabla de contenido
loading

Tabla de contenido