Checking Compatibility; Volume - Avaya AWH75 Manual Del Usuario

Checking Compatibility

NOTE: The compatibility setting of "1" is set at the factory to work with most phones.
However, if you do not hear a dial tone, if either you or the recipient is having trouble hearing,
or if you experience buzzing/hissing, please follow the directions below.
Adjust your telephone configuration dial on the base to position 3 for the following tele-
phones: 2420, 4610SW, 4620, 4620SW, 4621SW, 4622SW, 4625SW, 4630SW, 5420, 5610,
5620, 8403, 8405, 8410D, 8411D and 8434.
Adjust the configuration dial to position 1 for the following telephones:
2410, 4630, 5410, 6416D+M, 6424D+M, and 1600 and 9600 series.
If you cannot hear a dial tone through your headset, use a coin or small screwdriver to
turn the telephone configuration dial until you can. Make sure that a number is aligned
with the position indicator.
1. Place a call to someone you know.
2. While speaking, turn the configuration dial through the four positions.
3. Select the position that provides the best sound quality for both you and the recipient.
14
Listening Volume
NOTE: Be sure to set your telephone's volume at the mid range before adjusting
the AWH75N volume.
Minor Adjust
Push on the "+" and "–" buttons to adjust
listening volume in minor incremental
adjustments.
NOTE: You must be in talk mode (i.e. on a
call) to adjust.
Headset Mute
Major Adjust
Use listening volume major adjust
control on the back of the base for
large incremental adjustments.
NOTE: 1 is the loudest setting.
4 is the lowest setting.
WARNING:
Do not use headset at high volumes for
extended periods of time. Doing so can
cause hearing loss. Always listen at
moderate levels. For more information
on headsets and hearing, visit:
www.plantronics.com/healthandsafety
To mute headset, long press the volume
down button (3 seconds). Press again to
unmute.
Talk indicator light on base will flash
while muted.
You will hear 3 rapid beeps every 15
seconds to indicate that mute is on.
15