Tools And Materials; Before You Begin - Kohler K-308 Guia De Instalacion

Tools and Materials

Pipe Adjustable
Wrench Wrench
Assorted Plumbers
Screwdrivers Putty
Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don't
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kohler Company.

Before You Begin

CAUTION: Risk of product damage. The valve contains plastic
components. Do not apply excessive heat if you solder the valve
connections.
Observe all local plumbing and building codes.
The valve shuts off by water pressure. Do not force the handle in
any direction. To turn the valve off, gently turn it to the "Off"
position.
Flush all piping thoroughly before installing this valve.
Do not use plastic pipe between the valve and the spout. Use
1/2" nominal copper tube or 1/2" iron pipe.
Do not connect a deck-mount spout, diverter, or hand shower to
the spout outlet unless you cap the shower outlet on the valve.
Install a pipe or tube in a straight drop of 7" (17.8 cm) to 18" (45.7
cm) with only one elbow between the valve and the
wall-mounted spout. Other types of installation may cause
unsatisfactory shower performance.
Kohler Co. reserves the right to make revisions in the design of
products without notice, as specified in the Price Book.
088841-2-AC
Strap Hacksaw or Tubing Cutter
Wrench
Thread Hex
Sealant Wrench Thermometer
2
Propane
Torch
Solder
Kohler Co.