Technical Specifications - Audi Wallbox Manual Del Usuario

Technical specifications

Electrical properties
Connection capacity
Charging capacity
Charge mode
Fixed charging cable
Number of fixed
charging cables
Charging cable length
Installation wiring
Metering
Safety and certification
Upstream installation
protection
Static power limitation
Earth leakage sensor
(ELS)
Ground loss monitor
Operating temperature
range
Storage temperature
range
Operating humidity
Maximum installation
height
Enclosure ratings
Certification
8
1-phase, 230 V, 32 A, 50 Hz.
7.4 kW (1-phase - 32 A).
Mode 3 (IEC 61851) - ISO 15118*.
Type 2 plug (IEC 62196-2).
1.
4.5 m or 7.5 m.
16 A installation input
terminals: 1 - 6 mm².
Optional, for Audi Wallbox pro.
Minimum dedicated 1-phase 32 A (32 A station) or 3-phase 16 A
(16 A station) upstream circuit breaker and at minimum RCD type
A (30 mA AC). Check local installation requirements if additional
measures are required.
Via DIP-switches.
6 mA DC
Physical connection m quality onitoring, without
ground monitoring
Via CT coils - optional comfort feature.
Invasive / non-Invasive - 40 A - 200 A,
brands: VAC, LEM, and Nidec.
See chapter Set DIP-switches for the supported models.
-30 °C - +50 °C.
-30 °C - +85 °C.
Max. 95 % - non-condensing.
Max. 4000 m above sea level.
IP54 (IEC 60529), IK10 (IEC 62262).
See EU Declaration of conformity
3-phase, 400 V, 16 A, 50 Hz.
11 kW (3-phase - 16 A).
32 A installation input
terminals: 1 - 10 mm².