Configure The Audi Wallbox Plus And Audi Wallbox Pro Locally - Audi Wallbox Manual Del Usuario

Configure the Audi Wallbox plus and
Audi Wallbox pro locally
NOTE: For further information about the configuration, refer to the online manual at
www.elli.eco/download.
Precondition: The wallbox is installed and
you have the configuration sticker which is
supplied with the charging station.
1. If the input power to the wallbox is on,
have it switched off at the power supply
cabinet. Then have the input power swit-
ched on again.
2. The LED indicating the wallbox's state
shows solid blue and the Configuration
Manager is accessible.
3. Stand close to the wallbox with your
mobile device.
4. Connect to the Wi-Fi Hotspot listed on the
sticker..
5. Open any internet browser on your mobile
device and enter the IP-Address for the
Configuration Page: 192.168.123.4
6. Use the Configuration Page Password
shown on the sticker to log in to the Con-
figuration Manager.
7. Configure the settings of the wallbox
according to your requirements:
a. Establish an internet connection for the
wallbox, e.g by setting access para-
meters to your home Wi-Fi or local area
network (LAN).
b. Set your personal preferences, for
example: language, log-in password,
use of charge cards for access control.
39