Tabla de contenido
8.2 The seat unit can be adjusted into different
positions, lift the handle at the back of the seat unit
up and adjust to desired position.
WARNING Always check that the seat unit is in one of
the positions by pushing it back until it locks into place.
WARNING Ensure that children are kept away from
all moving parts of the pram to avoid risk of injury.
8.3 Press both of the buttons on each side of the frame
to adjust the footrest.
Please Note! Maximum weight on the footrest is 3kg.
WARNING Never let your child stand on the footrest.
9) ASSEMBLY OF THE APRON (Accessories)
9.1 Pull the apron over the footrest.
9.2 Fasten the apron with the press stud on the
inside of the hood.
Fasten the press studs at the back of the apron to
the back of the seat unit.
IMPORTANT! The hood cannot be folded down
when the apron is permanently attached to the hood.
Open the zip in the middle of the apron when taking
your child in or out of the pram.
10) REMOVAL OF THE SEAT UNIT FABRIC
10.1 Release the push buttons from the hood, remove
the hood from the seat frame,
WARNING The hood must always be assembled
when the pram is in use.
10.2 Unbutton the buttons and buckles on each side.
10.3 - 10.4 open the zipper located under the seat, remove
the fabric from the seat plate.
10.5 Thread all seat belts through the holes.
10.6 Remove the push button around the folding handle
and remove the fabric from the seat frame.
11) RAINCOVER (ACCESSORY)
1. Assemble the rain cover by placing it over the
hood and pull over the carrycot or the seat unit.
2.
The rain cover has a large window at the top
opening that you can open and close with the
Velcro fasteners.
3.
Make sure that the side ventilation windows are
always open and free so that ventilation is ensured.
Always use rain protection when it is raining or
snowing. If the stroller is wet, try to dry it first
before using the rain cover. Let the rain cover
dry properly before putting it back in its pocket.
5-Point Harness
1) 5-POINT HARNESS - BUCKLE YOUR CHILD
1.1 Place the 5 harness straps in front of the child so
that the child is not sitting on them.
1.2 Assemble the left shoulder and waist straps by
sliding the upper left buckle into the lower left
buckle until it clicks into place.
1.3 Assemble the right shoulder and hip straps by
sliding the upper right buckle into the lower
right buckle until it clicks into place.
1.4 Click the right buckle over the left buckle until they
are held together as a unit. It is very important that
they sit together properly and that they cannot
be pulled apart.
1.5 Lock the harness with the harness lock on the
crotch strap with a "" CLICK "".
36
WARNING Always check that the belt is
properly closed by pulling on it.
1.6 Adjust the harness using the sliding adjusters (3)
on the shoulder and hip belts so that the belt
fits snugly on the child's body.
To release the shoulder and waist straps, press in
the buttons on the sides of the harness lock.
WARNING Always fasten the child in with the
harness when the child is sitting in the stroller.
Check that all buckles are correctly fastened and
that the harness is securely assembled in the stroller.
WARNING Never use the seat if parts of the
5-point harness are missing or if the harness is
damaged. Always check that the harness is
properly closed.
WARNING The 5-point harness contains magnets
or magnetic components. Magnets that attract
each other or a metallic object in the human
body can cause serious injury or death. Seek
medical advice immediately if magnets are
swallowed or inhaled.
WARNING Medical devices such as implanted
pacemakers and defibrillators might contain
sensors that respond to magnets and radios
when in close contact. To avoid any potential
interactions with these devices, keep the harness
a safe distance away from your device (more than
15 cm apart). But consult with your physician and
your device manufacturer for specific guidelines.
2) CHANGE POSITION OF THE 5-POINT HARNESS
2.1 - 2.2.2 Shoulder straps, Remove the hood. Remove
the shoulder pads. Push the shoulder and hip
straps through the holes in the seat cover.
Open the zipper underneath the seat.
Open the press studs that secure the seat fabric
over the frame.
Open the press stud that holds the
adjustment handle.
Pull the back plate out of the fabric and place
the shoulder straps in the desired position in the
back plate.
Insert the shoulder straps into the seat fabric in
the same position.
Slide the back plate back into the seat cover.
2.3 - 2.3.3The Crotch Strap
Pass the crotch strap through the seat cover and
the seat plate. Then mount the crotch strap in
the desired position in the seat plate and pass
the crotch strap in the same position through
the fabric.
Close the zipper at the bottom of the seat.
Close the press studs firmly over the frame on
both sides.
Thread the strap through the hole in the fabric
and secure it around the adjustment handle with
the press stud.
Put the shoulder pads onto the shoulder straps.
WARNING Before you use the pram again
always check that the seat unit fabric is secure and
that all zips are securely and properly fastened
WARNING It is important that the seat unit fabric
is always correctly fitted
WARNING Never use the pram without making
sure the seat unit fabric is correctly assembled on
the frame first.
NXT90 Classic v 1.0
Capítulos
Tabla de contenido
