Residual Risk; General Instructions; Introduction; Defi Nitions - LIBERO POINT NERLP2 Instalación Uso Y Mantenimiento

RESIDUAL RISK

Crushing
Slipping or falling
Burns
Shearing of upper limbs
Electrocution
Falling from above
Tipping of loads
B

GENERAL INSTRUCTIONS

B1

Introduction

This section describes the symbols used
(that mark and identify the type of warning)
and gives the defi nitions of terms used in the
manual, responsibilities and copyright.
B2 Defi nitions
Listed below are the defi nitions of the main
terms used in the Manual. Read them carefully
before making use of the Manual.
Operator:
machine installation,
maintenance, cleaning, repair and transport
personnel.
Customer:
the person who purchased the machine and/
or who manages and uses it (e.g. company,
entrepreneur, fi rm).
Manufacturer:
Electrolux Professional SPA or any other
service centre authorised
Professional SPA.
Operator for normal machine use:
an operator who has been informed and trained
All manuals and user guides at all-guides.com
DESCRIPTION OF HAZARDOUS SITUATION
Interference by third parties, use of inadequate lifting or carrying
equipment, wrong maneuvers.
The operator may slip due to the presence of water, dirt or
residuals of grease on the fl oor.
The operator deliberately or unintentionally touches some
components inside the machine without using gloves or fi rstly
allowing it to cool.
The operator intentionally or unintentionally puts fi ngers in a fan
that is on.
Contact with live parts during maintenance operations carried
out with the electrical panel powered. The operator intervenes
(with a power tool or without disconnecting the power to the
machine) lying down on the wet fl oor.
The operator works on the machine using unsuitable systems to
access the upper part (e.g. rung ladders, or climbs on it).
During maintenance on the machine or the packing containing
the machine with the use of unsuitable accessories or lifting
systems or with load unbalanced.
Table 2
regarding the tasks and hazards involved in
normal machine use.
Technical
technician:
an
Manufacturer
professional and specifi c training, experience
and knowledge of the accident-prevention
regulations, is able to appraise the operations
to be carried out on the machine and recognize
and prevent any risks. His professionalism
covers the mechanical, electrotechnical and
electronics fi elds.
adjustment, use,
Danger:
source of possible injury or harm to health.
Hazardous situation:
any situation where an operator is exposed to
one or more hazards.
Risk:
a combination of probabilities and risks of injury
or harm to health in a hazardous situation.
by Electrolux
Protection devices:
safety measures consisting of the use of
specifi c technical means (guards and safety
devices) for protecting operators against
dangers.
35
Residual risks
assistance
operator instructed/trained
and who,
or specialized
by the
based on his