intensity TWIN STIM III Manual De Instrucciones página 33

Stimulation is
ineffective
The skin
becomes red
and/or you feel a
stabbing pain
Output current
stopes during
therapy
All manuals and user guides at all-guides.com
Program option
in use
Improper electrode
and applicator
placement
Unknown
Use the electrodes on
the same site every
time
The electrodes are
not sticking to the
skin properly.
The electrodes are
dirty
The surface of the
electrode was
scratched.
The electrode pad
comes off the skin.
The cable is
disconnected.
The power of the
batteries and been
exhausted
3. If still intermittent after
replacing lead wire, a
component may have failed.
Call the repair department.
Some programs will seem
intermittent. This is expected.
Refer to the Program
Option Controls in the
Operation section for a
description of the program
option.
Reposition electrode and
applicator
Contact clinician.
Re-position the electrodes. If
at any time you feel pain or
discomfort stop use immediately.
Ensure the electrode is stuck
securly on the skin
Clean the electrode pads with
a damp, lint free cloth or
replace new electrode pads.
Clean the electrode belt
according the description in
user manual.
Replace new electrode.
Turn off the device and stick the
electrode pad firmly to the skin
Turn off the device and connect
the cable.
Please replace them with new
batteries.
33