Top Rack Loading - Kenmore ULTRA WASH 665.1389 Manual De Instrucciones

Loading Recommendations
Place cups and glasses in the rows between tines. Placing them over the tines can lead to breakage and water spots.
To avoid damage to your delicate items, be sure china, crystal, stemware and other similar items do not touch during
dishwasher operation.
Load lightweight and dishwasher-safe plastic items only in the top rack.
Fold-down Tines (on some models)
The row of tines on the left-hand and right-hand sides of
the top rack can be adjusted to make room for a variety of
dishes.
1. To adjust, grasp the tip of the tine that is in the holder
in the front of the rack.
2. Gently push the tine out of the holder.
3. Lay the tines down, toward the center of the rack.
No-Flip Clips (on some models)
The no-flip clips hold in place lightweight items such as
cups, lids, or bowls during washing. The clip can be
moved to another tine by pulling up and off.
Removable Top Rack (on some models)
The removable top rack allows you to wash larger items such as pots, roasters, and
cookie sheets in the bottom rack.
NOTE: If the clips do not have ridges, your upper rack is not removable.
IMPORTANT: Remove dishes prior to removing the top rack from dishwasher.
To remove the top rack
1. Pull the rack forward slightly to access clips.
2. While pressing the ridges in, push back on the clip until the outer side releases. Slide
the clip to the inside of the track edge to remove the clip.
3. After removing both clips, pull rack out.
To replace the top rack
1. Place the rollers on each side of the rack into the rack tracks and push the rack back.
2. Align the open side of the clip with the inside edge of the rack track.
3. Push the ridges and slide the clip toward the outside rack edge until it locks into
place.
4. Repeat on the other side.
5. Pull the rack out all of the way to ensure clips are fully seated.
10
All manuals and user guides at all-guides.com
10 place load

Top Rack Loading

12 place load