Sportplus X-BIKE Manual De Instrucciones página 42

6. USING THE COMPUTER
Program selection and operation
• Connect the power adapter (16) to a suitable wall socket first and then to the adapter
socket on the product, not on the computer.
In stop mode, press the ↑ or ↓ button to select a program.
1.
2. Press ENTER to confirm.
3. All parameters will start flashing in sequence in the display. Use the ↑ and ↓ buttons
to select the respective values.
4. Press ENTER to confirm each time.
5. If no setting is configured within 20 seconds, the computer will automatically exit the
setting mode.
6. After all adjustable values have been entered, the computer will emit an acoustic signal.
Press the ST/SP button to deactivate the signal and to start the workout.
7. You may also press the ST/SP button immediately to start the workout directly without
entering any data.
Please note: Some programs do not support manual configuration of certain parameters.
Please note: The "time" and "distance" parameters cannot be adjusted manually within
the same program.
Manual program (P1):
• Select the manual program using the ↑ or ↓ button. Press ENTER to confirm.
• Use the ↑ and ↓ buttons to enter the desired workout parameters. Press ENTER to
confirm each time.
• Press the ST/SP button to start the workout.
• You may also press the ST/SP button immediately to start the workout directly without
adjusting any parameters.
• Press the + or ↓ button at any time during the workout to adjust the resistance level
as desired.
Please note: When the value reaches zero, the computer will emit an acoustic
signal. Press the start/stop button to continue the workout.
Preset programs (P2–P6)
Select one of the pre-set programs using the ↑ or ↓ button. Press ENTER to confirm.
•
• The preset programs differ in regard to resistance, time, distance and calorie
consumption settings.
• The following table shows the preset values for the resistance levels of the different
programs.
You may nevertheless press the ↑ or ↓ button at any time during workout to adjust the
•
resistance accordingly.
• Press the start/stop button to start the workout.
SP-HT-1004-iE-IM-V01.indb 42
42
4/21/2021 4:09:28 PM