Exposure Correction (Ev) For Flash Group C Settings On The Master Flash Unit; Partial Light Output (M) In M-Mode Settings On The Master Flash Unit; On The Master Flash Unit - Metz mecablitz 52 AF-1 Canon digital Manual De Instrucciones

10.1.4.2 Exposure correction (EV) for flash
Set the lighting conditions to xx as described
in 10.1.4
REMOTE
E TTL
MASTER
+ 1
• If an exposure correction value (EV) is to be
A : B C
1 : 4
INFO A:B C
• Press the
A:B
1 : 4
C
• Use the sensor buttons
+
1 / 3
+
2 / 3
+ 1
• Press the
k
A:B
1 : 4
The setting is adopted immediately.
C
+2/3
Slave flash group C is usually required to illu-
REMOTE
E TTL
MASTER
+ 1
minate the background in order to prevent
shadows from forming.
A : B C
1 : 4 +2/3
INFO A:B C
170
group C settings on the master
flash unit
A:BIC
.
set for slave flash group C, then press sen-
A:BIC
sor button on the touch display.
sensor button on the touch
display.
exposure correction value (EV) (e.g. +2/3).
+2/3
sensor button on the touch
display.
REMOTE
M
MASTER
1/1
4 1/1
A
4 1/1
B
4 1/1
C
INFO A:B:C
A
1/1
B
1/1
C
1/1
-2
1/8 /
to set an
3
1/16
1/16 -1 /
3
-2
1/8 /
3
1/16
-1
1/16 /
3
A
1/16
B
1/1
C
1/1
10.1.5 Partial light output (M) in M-mode
settings on the master flash unit
M
Set the mode to as described in 10.1.2.
A:B:C
• Press the sensor buttons on the touch
display as many times as it takes for the
partial light output setting to appear.
• Press the sensor button on the touch
display for which a partial light output is to
be set (in the example, a partial light out-
put of 1/16 is to be set for slave group A).
• Press the sensor buttons on the
touch display to set the desired partial light
output.
• Press the sensor button of the selected par-
1/16
tial light output on the touch display.
The setting is adopted automatically.