Dedicated Flash Functions - Metz mecablitz 52 AF-1 Canon digital Manual De Instrucciones

• After a series of flashes with full power and
short intervals, a pause of at least 3 minu-
tes must be observed after each series of
20 flashes!
• When taking a series of flash shots at full
light output and with rapid recycling times,
and with zoom positions of 35 mm and
less, the diffuser heats up, due to the high
level of thermal energy!
• This flash unit may be used in combination
with a camera-integrated flash only if the
flash can be folded out completely!

2 Dedicated flash functions

Dedicated flash functions are flash functions
that have been specially adapted to a given
camera system. Depending on the type of
camera, different flash functions are suppor-
ted.
• Flash-ready indication in camera viewfinder.
• Automatic flash sync speed control.
• E-TTL flash mode / E-TTL II flash mode.
• Automatic fill-in flash control.
• Manual flash exposure correction for E-TTL /
E-TTL II.
• Flash exposure storage FE with E-TTL /
E-TTL II.
• 1st or 2nd curtain synchronisation (REAR).
• Automatic high speed synchronisation
(HSS) with E-TTL / E-TTL II and M.
• Automatic motor zoom control.
• Extended zoom mode.
• Automatic AF measuring beam control.
• Automatic flash range indication.
• Programmed auto flash mode
(AUTO FLASH).
• Wireless Canon E-TTL remote flash mode.
• Servo mode.
• Wake-up function for the flash unit.
• Spot zoom mode.
• Firmware updates.
k
149