Lighting Conditions For Flash Groups A + B Settings; On The Master Flash Unit; Exposure Correction (Ev) For Flash Group C Settings - Metz mecablitz 64 AF-1 digital Manual De Instrucciones

10.1.4.1 Lighting conditions for flash groups
REMOTE
ETTL
MASTER
A : B
• If lighting conditions are to be set for slave
1 : 1
A : B
REMOTE
ETTL
MASTER
A : B
• Press the
1 : 1
A B
REMOTE
ETTL
MASTER
The selected setting is adopted.
A : B
k
1 : 4
A : B
184
A + B settings on the master flash
unit
flash group A+B, then press sensor button
A : B
on the touch display until the selecti-
on of ratio settings appears.
A 3 4 B
or sensor buttons on the
touch display and set the lighting conditi-
ons (e.g. 1: 4) for the slave flash groups.
10.1.4.2 Exposure correction (EV) for flash
REMOTE
ETTL
MASTER
Set the lighting conditions to
A : B C
bed in 10.1.4.
1 : 4
• If an exposure correction value (EV) is to be
set for slave flash group C, then press sen-
A : B I C
sor button
O
RATIO/EV
• Press the
A : B u 1 : 4
display.
C u
• Use the sensor buttons
O
EV
exposure correction value (EV) (e.g. 2/3).
1/3
2/3
1
• Press the
p
q
display.
REMOTE
ETTL
The setting is adopted immediately.
MASTER
Slave flash group C is usually required to illu-
A : B C
minate the background in order to prevent
1 : 4 2/3
shadows from forming.
A : B I C
group C settings on the master
flash unit
A:BIC
as descri-
A:BIC
on the touch display.
sensor button on the touch
to set an
2/3
sensor button on the touch