Bounce Flash With A Reflector Card; Flash Exposure Memory Fe - Metz mecablitz 52 AF-1 Canon digital Manual De Instrucciones

12.2 Bounce flash with a reflector card

The use of bounce flash with the integrated
reflector card can bring out highlights in
the eyes of human subjects:
• Tilt the reflector head upwards by 90°.
• Pull the reflector card together with the
wideangle diffuser from above out of the
reflector head and forwards.
• Hold the reflector card and push the
wide-angle diffuser back into the
reflector head.

12.3 Flash exposure memory FE

Several cameras feature a flash exposure
memory (FE; Flash-Exposure). The flash unit
supports this during E TTL flash mode.
It can be used to define and store the expo-
sure level for the subsequent shot before the
shot is actually taken. This can be useful
when, for example, the flash exposure has to
be adjusted to specific details that may not
be necessarily be identical with the main
subject.
This function is activated on the camera. The
subject details for the flash exposure are
measured and brought into focus by the
cameraís AF sensor/metering window.
Pressing the cameraís FE button (the descrip-
tion varies from camera to camera; see came-
ra operating manual) causes the flash unit to
fire an FE test flash.
The stored metering value, for example „EL",
is then displayed in the camera viewfinder.
The camera uses the reflected light of the
test flash to determine the light output requi-
red for the subsequent exposure.
The actual main subject can then be brought
into focus with the camera's AF sensor/mete-
ring window. When the shutter release is
pressed, the picture will be exposed with the
previously defined light output of the flash
unit!
The flash exposure memory FE is not suppor-
ted during the green fullyautomatic program-
me, the Vari programme and the subject pro-
grammes! Further details regarding settings
and handling can be found in the camera
operating manual!
k
183