Info; Auto Off For The Flash Unit - Metz mecablitz 52 AF-1 Canon digital Manual De Instrucciones

The options can be set after pressing the
OPTION
button.
REAR (Synchr. on 2nd curtain),
see 11.3
ZOOM SIZE (shooting format adjustment),
see 11.2.4
ZOOM MODE (illumination),
see 11.2
STANDBY (autom., unit switch-off),
see 3.6
MOD.LIGHT (modelling light), see 11.1
AF BEAM (AF auxiliary light), see 11.4
m / ft (metres / feet), see 11.6
In the menus shown on the flash unit, all
fields that have a black background are confi-
gured as sensor buttons that can be pressed
for modifications/changes in the menu.
In the images in the user's guide, only the
sensor buttons that must be pressed for set-
ting the described function are marked in
black.

3.5 INFO

The current settings of the flash unit can be
E TTL
displayed during operation.
-3,5 m
0,3
• Press the
Z 105 m
touch display. Info panel 1 appears.
F2,8
OOM
m
EV
- Spot zoom mode (SP) is set, (see 11.2.2).
INFO
1
+ 2/3
- AF-BEAM (AF auxiliary light) is switched off,
(see 11.4).
- Modelling light (MOD.LIGHT) is set,
(see 11.1).
- The automatic unit switch-off is set for
10 minutes (see 3.6).
- The temperature display increases after
intensive use.
• While info panel 1 is being displayed, press
---------- INFO ----------
the touch display once again.
4 4,0
F
Info panel 2 will be displayed.
435 mm
A.Z
oom
4 400
ISO

3.6 Auto OFF for the flash unit

4 +1
EV
To save battery power and prevent inadver-
tent battery drain, the flash unit is factory-set
to automatically switch to standby mode
(Auto OFF) 10 minutes after
• being switched on
• a flash is fired
• the shutter release is actuated
• the camera's exposure metering system is
switched off...
...switched to stand-by mode, (Auto-OFF) to
INFO
sensor button on the
153
k