Tabla de contenido
Idiomas disponibles
Idiomas disponibles
FITTED WITH 2X RGBW PAR CANS + 2X RED & GREEN LASERS
Safety Recommendations
•
Please read the instructions carefully. They contain important information about the installation, operation and
maintenance.
•
Keep this User Manual for future reference. If you sell the unit to another user, be sure that he also receives this
instruction booklet.
•
Unpack and check the unit carefully that it has not been damaged during transport before using the unit.
•
Before operating, ensure that the voltage and frequency of power supply match the power requirements of the
unit.
•
The unit is for indoor use only in a dry location.
•
It is essential that the unit is earthed. Only connect to a wall outlet with earth connection.
•
The unit must be installed in a location with adequate ventilation, at least 0.5m from adjacent surfaces. Be sure
that no ventilation slots are blocked.
•
Disconnect mains power before fuse replacement or servicing.
•
Make sure there are no inflammable materials close to the unit during operation.
•
In the event of serious operating problem, stop using the unit immediately.
•
The light sources of the light effects are not replaceable. If a light source is faulty, the light effect must be dis-
carded.
•
Do not touch any wires during operation as high voltage might be causing electric shock.
•
The product is for decorative purposes only and not suitable as a household room illumination.
DISCONNECT DEVICE
EN
Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall
remain readily operable.
Explanation of SYMBOLS ON THE SILKSCREEN
The triangle containing a lightning symbol is used to indicate whenever your health is at risk (due to
electrocution, for example).
An exclamation mark in a triangle indicates particular risks in handling or operating the appliance.
Class I protection: Connect only to an earthed mains outlet
The unit complies with UK standards
For indoor use only
Minimum distance between the appliance and other objects
0.5m
Don't stare into the light beam
Don't stare into the laser beam
DO NOT OPEN THE HOUSING
Installation of the units
Before positioning the light stand, ensure the stability of the installation site. Drive the screw into the screw hole
on the stand. Make sure that the units can't fall from the stand. The manufacturer cannot be held responsible for
damages due to bad installation of the units.
2
Manual - DJLIGHT65
INSTRUCTIONS FOR USE
LIGHT STAND
CAUTION
SHOCK HAZARD
©Copyright LOTRONIC 2021
Tabla de contenido
