Safety Instructions - Ibiza Light COMBO 3-IN-1 Light effect Manual De Uso

1. Safety Instructions

• Please keep this User Manual for future reference. If you sell the unit to another user, be sure that he also receives
this instruction booklet.
• Unpack and check the unit carefully that it has not been damaged during transport before using the unit.
• Before operating, ensure that the voltage and frequency of power supply match the power requirements of the unit.
• The unit should be connected to a main socket outlet with a protective earth connection
• The unit is for indoor use only in a dry location.
• The unit must be installed in a location with adequate ventilation, at least 0.5m from adjacent surfaces. Be sure that
no ventilation slots are blocked.
• Disconnect mains power before fuse replacement or servicing.
Replace fuse only with the same type.
•
Make sure there are no inflammable materials close to the unit during operation.
•
Use safety cable when fixing this unit.
•
In the event of serious operating problem, stop using the unit immediately.
•
Never try to repair the unit by yourself. Repair carried out by unskilled people can lead to damage or malfunction.
•
Please contact the nearest authorized technical assistance center and always use the same type of spare parts.
• Do not touch any wires during operation as high voltage might be causing electric shock.
• The product is for decorative purposes only and not suitable as a household room illumination.
DISCONNECT DEVICE
Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain
readily operable.
2. Specifications
Supply Voltage: ............................................................................................. AC110～240V 50/60HZ
Power: ........................................................................................................................................ 20W
LED effect: ......................................................... 56 x 5mm RGBW LED (R:12, G: 12, B: 24 and W: 8)
Laser diode ................................................................................................. Red: 80mW; green 30mW
LED strobe ...................................................................................................................... 4 x 1W white
Fuse: .............................................................................................................................................. 3A
Operating modes： ........................................................... Auto-run, Sound Control, remote control
Dimensions: ....................................................................................................... 300 x 225 x 163mm
Weight: ..................................................................................................................................... 2.4kg
3. Installation
The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is firmly fixed to avoid
©Copyright LOTRONIC 2015
GB
COMBO-3IN1 2