• Use only the included accessories and parts, and specified tools for
the installation. Using non-standard parts can cause water leakage,
electrical shock, fire and injury or property damage.
• Make sure that the outlet you are using is grounded and has the
appropriate voltage. The power cord is equipped with a three-prong
grounding plug to protect against shock. Voltage information can be
found on the nameplate of the unit.
• Your unit must be used in a properly grounded wall receptacle. If
the wall receptacle you intend to use is not adequately grounded or
protected by a time delay fuse or circuit breaker (the fuse or circuit
breaker needed is determined by the maximum current of the unit.
The maximum current is indicated on the nameplate located on
unit), have a qualified electrician install the proper receptacle.
• Install the unit on a flat, sturdy surface. Failure to do so could result
in damage or excessive noise and vibration.
• The unit must be kept free from obstruction to ensure proper
function and to mitigate safety hazards.
• DO NOT modify the length of the power cord or use an extension
cord to power the unit.
• DO NOT share a single outlet with other electrical appliances.
Improper power supply can cause fire or electrical shock.
• DO NOT install your air conditioner in a wet room such as a
bathroom or laundry room. Too much exposure to water can cause
electrical components to short circuit.
• DO NOT install the unit in a location that may be exposed to
combustible gas, as this could cause fire.
Portable air conditioner | Aire acondicionado portátil | Ar Condicionado Portátil
AF_Manual_AC_12000BTU_BAC4255_BAC4255N.indd 7
EN
7
21/01/2019 10:24