Becken BAC4255 Manual Del Usuario página 22

• Product uninstallation and recycling must be performed by a
certified technician.
Installation
Choosing The Right Location
Your installation location should meet
the following requirements:
- Make sure that you install your unit on
an even surface to minimize noise and
vibration.
- The unit must be installed near a
grounded plug, and the Collection Tray
Drain (found on the back of the unit)
must be accessible.
- The unit should be located at least
30cm (12") from the nearest wall to ensure proper air conditioner.
- DO NOT cover the Intakes, Outlets or Remote Signal Receptor of the
unit, as this could cause damage to the unit.
Recommend installation
Note: All the illustrations in the manual
are for explanation purpose only. Your
machine may be slightly different.
The actual shape shall prevail.
The unit can be controlled by the unit
control panel alone or with the remote
controller.
Tools Needed
- Medium Philips screwdriver;
- Tape measure or ruler
- Knife or scissors;
- Saw (optional, to shorten window adaptor for narrow windows)
22
AF_Manual_AC_12000BTU_BAC4255_BAC4255N.indd 22 21/01/2019 10:24