Water Drainage - Becken BAC4255 Manual Del Usuario

When the ambient temperature is higher than the setting temperature,
the unit will automatically stop the power management feature.
The compressor and (or) fan motor will resume.
Note: for units with power management light, the light will illuminate
under this feature.

Water drainage

- In dehumidifying modes, remove the upper drain plug from the back
of the unit, install the drain connector (5/8" universal female mender)
with 3/4" hose (locally purchased). For models without a drain
connector, just attach the drain hose to the hole. Place the open end
of the hose directly over the drain area in your basement floor.
Remove the
upper drain plug
Continuos
drain hose
- In heating pump mode, remove the lower drain plug from the back of
the unit, install the drain connector (5/8" universal female mender) with
3/4" hose (locally purchased). For the models without drain connector,
just attach the drain hose to the hole. Place the open end of the Hose
adaptor directly over the drain area in your basement floor.
Note: make sure the hose is secure so there are no leaks.
Direct the hose toward the drain, making sure that there are no kinks
that will stop the water flow. Place the end of the hose into the drain and
make sure the end of the hose is down to let the water flow smoothly.
Portable air conditioner | Aire acondicionado portátil | Ar Condicionado Portátil
AF_Manual_AC_12000BTU_BAC4255_BAC4255N.indd 51
EN
51
21/01/2019 10:25