Becken BAC4255 Manual Del Usuario página 49

FAN operation
- Press the MODE button until the FAN indicator light comes on.
- Press the FAN SPEED button to choose the fan speed.
The temperature cannot be adjusted.
- Do not duct tape the window.
TIMER operation
- When the unit is on, press the TIMER button will start the Auto-off
stop program; the TIMER OFF indicator light illuminates. Press the
UP or DOWN button to set the timer. Press the TIMER button again
within 5 seconds and the Auto-on start program is initiated.
And the TIMER ON indicator light illuminates. Press the UP or DOWN
button to select the desired Auto-on start time.
- When the unit is off, press the TIMER button to initiate the Auto-on
start program. Press it again within 5 seconds to and then Auto-off
stop program is initiated.
- Press or hold the UP or DOWN button to change the Auto time by
0.5 hour increments, up to 10 hours, then at 1 hour increments up to
24 hours. The control will count down the time remaining until start.
- The system will automatically revert back to display the previous
temperature setting if there is no operation in a 5 seconds period.
- Turning the unit ON or OFF at any time or adjusting the timer setting
to 0.0 will cancel the Auto Start/Stop timer program.
SLEEP(ECO) operation
- Press this button and the selected temperature will increase (cooling)
or decrease (heating) by 1°C / 2° F(or 1° F) 30 minutes.
The temperature will then increase (cooling) or decrease (heating)
by another 1°C / 2° F(or 1° F) after an additional 30 minutes.
This new temperature will be maintained for 7 hours before it returns
to the originally selected temperature. This ends the Sleep/Eco mode
and the unit will continue to operate as originally programmed.
Note: This feature is unavailable under the FAN or DRY modes.
Portable air conditioner | Aire acondicionado portátil | Ar Condicionado Portátil
AF_Manual_AC_12000BTU_BAC4255_BAC4255N.indd 49
EN
49
21/01/2019 10:25