Air Flow Direction Adjustment - Becken BAC4255 Manual Del Usuario

Other features
FOLLOW ME/TEMP. SENSING feature
Note: this feature can be activated from the remote control ONLY. The
remote control serves as a remote thermostat allowing for the precise
temperature control at its location. To activate the Follow Me/Temp.
Sensing feature, point the remote control towards the unit and press
the Follow Me/Temp. Sensing button. The remote control will send this
signal to the air conditioner until press the Follow Me/Temp. Sensing
button again. If the unit does not receive the Follow Me/Temp. Sensing
signal during any 7 minutes interval, the unit will exit the Follow Me/
Temp. Sensing mode.
Note: this feature is unavailable under the FAN or DRY modes.
AUTO-RESTART
If the unit breaks off unexpectedly due to the power cut, it will restart with
the previous function setting automatically when the power resumes.

AIR FLOW DIRECTION ADJUSTMENT

The louver can be adjusted automatically. Adjust the air flow direction
automatically:
- When the Power is ON, the louver opens fully.
- Press the SWING button on the panel or remote controller to
initiate the Auto swing feature. The louver will swing up and down
automatically.
- Please do not adjust the louver manually.
WAIT 3 MINUTES BEFORE RESUMING OPERATION
After the unit has stopped or turned off accidentally, its operation
cannot restart for 3 minutes. This happens in order to protect the unit.
Operation will automatically resume after 3 minutes.
POWER MANAGEMENT feature (on some models)
When the ambient temperature is lower than the setting temperature
for a period of time, the unit will automatically start the power
management feature. The compressor and fan motor stop.
50
AF_Manual_AC_12000BTU_BAC4255_BAC4255N.indd 50 21/01/2019 10:25