Startup Sequence - Starrett W2900 Manual Del Usuario

4.1 Startup Sequence

1. After the tool has shut down completely, and you have plugged it
in to charge, the tool will flash a sequence of information on the
display, see the examples below (Fig's.14-17). This is normal for
the indicator and a description of the screens is shown.
2. At the end of the sequence you will re-initialize the measurement
system. When "CAL" is displayed (Fig.18), move the spindle
slowly in and out, until the display starts to show measurements.
This movement will calibrate the indicator.
4.2 Calibrate
1. If you don't move the spindle, "Cal" will stay on the display for
about 10 seconds and the display will go blank.
2. To return to "Cal" mode move the spindle or quickly press the
on/off button.
3. If you move the spindle to fast it will take longer for the tool to
initialize.
RECHARGEABLE BATTERY
PKG08863-UMW2900 17