Wireless Overview - Starrett W2900 Manual Del Usuario

3.0 Wireless Functions
The new Wireless button (Fig.10) on the 2900-5 Indicator is used for
three functions; wireless on/off, sending a reading, and to change/reset
a function in profile mode.
1. You can turn the wireless "On" or "Off" by pressing and holding
the Wireless Radio Button for more than two seconds. The display
will change to the current wireless state either "On" or "Off"
(Fig.9A-B). When you release the button, the new state, either
"on" or "off" will be shown on the display. The tool will display
the new state for two seconds, and then the tool will revert back
to the current reading. You can tell that the wireless is on because
the wireless symbol will be visible on the display, Fig.11.
2. When the radio is active, a short press on the radio button will
transmit a reading, however, if the radio is off, nothing will
happen. The wireless icon (Fig.11) on the display will be shown
only when it is on and will flash when the tool is communicating
with another device.

WIRELESS OVERVIEW

PKG08863-UMW2900 13