Setup And Installation - Cameo ZENIT W600 SMD Manual Del Usuario

SETUP AND INSTALLATION

Thanks to its integrated plastic feet, the light can be positioned in a suitable location on a level
surface. Mounting to a traverse is possible using an Omega bracket which is attached at the cen-
tre of the device base (A) or else by means of two Omega bracket, which are mounted at the outer
attachment positions (B). 2 x Omega brackets are included. Suitable beam clamps are available
as an option. Ensure firm connections and secure the spotlight to the designated location (C) with
a suitable safety cable. The beam direction of the LED unit is set using the wing nuts on the side
independently of the device base.
HAZARD: Overhead mounting requires extensive experience, including the calcula-
tion of the load limit values of the installation material and regular safety inspection
of all installation materials and spotlights. If you do not have these qualifications, do
not attempt to perform an installation yourself. Refer instead to a qualified profes-
sional. There is a risk of incorrectly mounted and secured devices coming loose and
falling down. This can cause serious injury or death.
24
B A
C
B