Assembly - Bosch Kiox 300 Instrucciones De Servicio Originales

English – 8
Inserting and Removing the Display
(see figure A)
A
(1)
1
(5) (9)
1
(9)
To fit the display (1), attach the display (1) to the
front edge of the display fixture (9) in the direction of
travel, on the latching hook (5) ❶ and press the rear
side of the display (1) on the display fixture (9) ❷.
To remove the display (1), pull the display (1) to-
wards you ❶ until you are able to lift off the dis-
play (1) ❷.
A retaining strap can be secured to the bridge (11).
0 275 U07 3BK | (24.06.2021)

Assembly

2
(11)
(1)
2
Inserting the Locking Plate
(see figure B)
B
(6)
Insert the locking plate (4) into the adapter shell (6)
from below until you hear the locking plate (4) click
into place.
From this point onwards, you can no longer lift off the
display (1) from the display fixture (9) without re-
moving the display fixture (9) from the adapter
shell (6) by loosening the two fastening screws (10).
Note: The locking plate (4) is not an anti-theft device.
(9)
(10)
(4)
Bosch eBike Systems