Before Operating; Part Identification; Safety Points - Hoover JET & WASH Manual Del Usuario

Before operating

appliance for the first time
Please read through all of the information
below carefully. The information provides
important points for the safe use and the
maintenance of the appliance. Please
keep these operating instructions in a safe
place and provide them to the next
owner.

Part identification

1 = Collecting bin
2 = Motor block
3 = Snap fastener
4 = Castors
5 = Quick coupling
6 = On/Off switch
7 = On/Off pump switch (illuminated)
8 = Suction socket
9 = Carrying handle
10 = Mains cable
11 = Suction control
12 = Cleaning fluid hose (upper section)
13 = Flexible hose
14 = Suction tubes
15 = Hose clips
16 = Cut-off valve
17 = Carpet spray extraction nozzle
18 = Cleaning fluid hose (lower section)
19 = Upholstery nozzle
20 = Hard floor adapter
21 = Carpet nozzle
22 = Crevice Tool
23 = Upholstery spray extraction nozzle
24 = Cleaning fluid tank
25 = Textile cleaning fluid concentrate (Cleantex)
30 = Foam rubber filter
31 = Paper filter
32 = Clamping ring
33 = Paper filter bag
36 = Suction hose for cleaning fluid
37 = Suction tube
38 = Suction tube – park position
39 = Tube clips
6
GB

Safety Points

• HOOVER JET & WASH is intended for household
use by adults.
• This product is double insulated and must not be
earthed.
IMPORTANT: The wires in the power cord are
coloured in accordance with the following code:
Blue-Neutral Red-Live
13 AMP FUSED PLUG ON UK MODELS
ONLY
Connect only to an electricity supply at the voltage
shown on the cleaner rating label
• Do not allow nozzles and tubes (when the appliance
is switched on) to come within the proximity of the
head – danger for eyes and ears, for example.
• Do not vacuum noxious substances or corrosive or
solvent liquids.
• Never operate the appliance in rooms where
inflammable materials are stored or where gases
have formed.
• Materials such as petrol, paint thinner and heating
oil can form explosive gases or mixtures by being
subjected to centrifugal air from the appliance.
• Never vacuum hot ash or glowing objects.
• Check before every use to be sure that you have
correctly fitted the filters required for the specific
application.
• Do not vacuum toner dust! Toners such as those
used in printers and copiers, can be electric
conductors! Furthermore, it is possible that the
appliance's filter system will not completely filter out
toner dust, and in this way it can enter the air supply
of the room.
• Acetone, acids and solvents can attack the materials
used in this appliance.
• Extreme care is required when vacuuming stair
carpets with your appliance. Ensure that the vacuum
cleaner stands firmly on the step and take care that
the flexible hose is not stretched beyond its actual
length. When using the vacuum cleaner on stairs,
always ensure that you hold the appliance steady
with one hand.
• Do not leave the appliance unattended whilst it is
switched on and ensure that children do not play
around with the appliance.
• Always pull out the plug
– if the appliance malfunctions during operation
– before cleaning and maintenance
– after use
– when changing the filter.
• Never unplug the appliance by pulling at the cable,
but only by removing the plug directly from the
socket.
• Ensure that the main cable is not exposed to either