Tabla de contenido
Idiomas disponibles
Idiomas disponibles
2. TIMER ACTIVATION (STANDBY OUT)
The jack is for use with a recorder that has a timer activated switch.
GB
You would use this switch if you wanted to do a timed recording. It
is used in conjunction with the Line-out jack. See your recorder's
instructions to determine if this function will work with your recorder.
Note:
The ATS-909X radio can trigger the above function for an hour.
Note:
If you don't connect the standby out jack to your recorder for a
timed recording, you may turn on your recorder to record manually.
HEADPHONE SOCKET
A 3.5mm stereo Headphone Socket is provided on the left hand
side of your radio for use with headphones. Inserting a plug
automatically mutes the internal loudspeaker.
AM RF GAIN
The distortion while listening to AM band can be reduced by
adjusting level of the incoming signal using the AM RF Gain control.
LCD DISPLAY LIGHT
Backlight button is used to illuminate the display when it becomes
too dark to see the display. The light will remain on approximately
2 seconds after initiated or will extinguish any other function be
activated.
If an AC adapter is being used the LCD display will be illuminated
continuously while the radio is in operation.
36
Tabla de contenido
