Sangean ATS-909X Manual De Instrucciones página 35

REC STANDBY/LINE-OUT
The jacks on the left side of the radio are for audio output (Line-out)
and a timer activation (Standby out) to control external recorder.
GB
The ATS-909X has 3 timers which can be set for radio alarm and
can also trigger recording standby out to control external recorder
as Sangean's DAR-0. You can connect an external audio device
to record or play the programs received by the ATS-909X. You
can also set up a recording preset using the alarm function of the
radio at the same time. Regarding the setting up of the radio alarm
function, you may refer to above procedure.
To record or play the programs received by the ATS-909X, connect
between the Line-out jack of the ATS-909X and the Line-in (or Aux-
in) jack of the external recorder via a stereo 3.5Φmm wire. Also to
trigger standby out to control external recorder, connect between
the Standby out jack of the ATS-909X and the remote jack of the
external recorder as Sangean's DAR-101 via a 3.5Φmm plug into
the audio input jack of the recording device.
34