Scope Of Delivery; Proper Use; General Safety Information - Scheppach WSE5000-Multi Traducción De Manual De Instrucciones Original

3. Scope of delivery

• Operating manual
• Welding machine
• Hose assembly
• Welding wire reel (2x)
• Contact tip (4x)
• Rod electrode (5x)
• Earth clamp
• Electrode holder

4. Proper use

This welding machine is suitable for welding metals
such as carbon steel, alloy steel, other stainless steels,
copper, aluminium, titanium etc. The product has an in-
dicator lamp, a thermal protection display and a cooling
fan. It is also equipped with a carrying strap for safe
lifting and moving of the product.
The machine may only be used in the intended manner.
Any use beyond this is improper. The user/operator, not
the manufacturer, is responsible for damages or inju-
ries of any type resulting from this.
The device may only be operated by qualified or in-
structed personnel. This includes persons who, due
to their technical training, experience and knowledge
of the relevant facilities, are able to assess the work
assigned to them and recognize possible dangers or
persons who are responsible for the assigned work
and have been instructed about possible dangers due
to careless behaviour.
Please observe that our equipment was not designed
with the intention of use for commercial or industrial
purposes.
We assume no guarantee if the equipment is used in
commercial or industrial applications, or for equivalent
work.
30 | GB

5. General safety information

m WARNING! Read all safety warnings, instruc-
tions, illustrations and specifications provided
with this power tool. Failure to follow all instructions
listed below may result in electric shock, fire and/or se-
rious injury.
Always observe
m ATTENTION!
Only use the device as per its suitability, which is listed
in these instructions.
Improper handling of this system can be dangerous for
persons, animals and property. The system user is re-
sponsible for their own safety and that of other persons:
• Always read these usage instructions and observe
the regulations.
• Repairs and/or maintenance work may only be car-
ried out by qualified persons.
• Only the welding cables included in the scope of
delivery or accessories recommended by the manu-
facturer may be used.
• Ensure that the device is looked after appropriately
• The device must not be constrained or stood directly
against the wall during its functional life so that suffi-
cient air can always be taken in through the opening
slits. Make sure that the device is connected prop-
erly to the mains. Avoid any tensile stress on the
mains cable. Unplug the device before setting it up
in another location.
• Pay attention to the condition of the welding cable,
the electrode holder and the earth clamp, wear on
the insulation or on the parts carrying the electrical
power can lead to a hazardous situation and reduce
the quality of the welding work.
• Arc welding creates sparks, melted metal parts and
smoke, therefore observe the following: Remove all
flammable substances and/or materials from the
workplace.
• Make sure that there is a sufficient air supply avail-
able.
• Do not weld on containers, vessels or pipes that
have contained flammable liquids or gases. Avoid
direct contact with the welding circuit. The off-load
voltage arising between the electrode holder and
the earthing clamp can be dangerous.
• Do not store or use the device in a damp or wet envi-
ronment or in the rain
www.scheppach.com