Technical Data - Scheppach WSE5000-Multi Traducción De Manual De Instrucciones Original

• Maintain the welding device regularly and keep it in
good condition.
• Welding cables should be fully unwound and run
parallel to the floor insofar as possible.
• Equipment and installations at risk from disruptive
radiation should be removed from the welding area
if possible or shielded.
• Using an electromagnetic filter that reduces electro-
magnetic interference.
General safety measures
The user is responsible for installing and using the de-
vice properly in accordance with the instructions of the
manufacturer. If electromagnetic interference is iden-
tified, it is the responsibility of the user to eliminate it
using the technical aids mentioned above under point
"Important note on the power connection".
Warning! This power tool generates an electromag-
netic field during operation. This field can impair active
or passive medical implants under certain conditions.
In order to prevent the risk of serious or deadly injuries,
we recommend that persons with medical implants
consult with their physician and the manufacturer of
the medical implant prior to operating the power tool.

6. Technical data

Dimensions L x W x H
Mains voltage U
1
Power consumption P1
Protection category
Insulation class
Type of cooling
Weight of the welding
wire reel
Weight
34 | GB
415 x 201 x 249 mm
230V~ / 50/60 Hz
5,75 W
F
IP 21S
AF
max. 5 kg
5.3 kg
www.scheppach.com
MIG / flux-cored wire welding
Off-load voltage U
0
Working voltage U
2
Welding current l
2
Highest mains current
rated value
max
Effective value of the
largest mains current
eff
Energy efficiency of the
power source
Power consumption in
idle state
Welding wire Ø
Duty cycle X
20%
60%
100%
MMA welding
Off-load voltage U
0
Working voltage U
2
Welding current l
2
Highest mains current
rated value
max
Effective value of the
largest mains current
eff
Energy efficiency of the
power source
Duty cycle X
20%
60%
100%
76 V~
15.5 - 22 V~
30 - 160 A
25 A
11.2 A
83%
20 W
0.6 - 1.0 mm
160 A
93 A
72 A
76 V~
20.4 - 25.6 V~
10 - 140 A
26.2 A
11.7 A
85%
140 A
82 A
63 A